If you are facing a problem with your air conditioner, then it is time for you to take action and fix the issue as soon as possible. If you have not fixed this yet, then you should know that there are many reasons why your ac might be blowing cold air but house still hot what is the reason behind it. So, if you want to find out how to fix ac not working properly, then you need to read on further.

Why Your AC Is Not Working Properly?

There are several reasons why your ac may not be working properly. Some of these include:

The thermostat is faulty or damaged.

The compressor has failed.

The condenser coil is clogged.

The evaporator fan motor is broken.

The blower wheel is worn out.

The ducts are blocked.

The filter needs cleaning.

The drain pan is full.

The drain line is blocked.

The system is dirty.

The unit is leaking refrigerant.

You can also check whether the thermostat is set correctly. You can do so by checking the following things:

Check the temperature setting.

Make sure that the thermostat is in the correct position.

Check the wiring connections.

If everything seems fine, then you can contact an expert technician to help you repair your ac.

How To Fix An Ac Not Working Properly? – Tips And Tricks

Now that we have discussed some of the reasons why your ac may be blowing cold air but still hot, let us now discuss how to fix an ac not working properly. Here are some tips and tricks that will help you fix your ac without any problems.

First of all, make sure that you turn off the power supply before doing anything else. Then, remove the cover from the back panel. After that, disconnect the wires from the terminals. Next, remove the screws holding the back panel together. Once that is done, you can lift up the back panel. Now, look at the condenser coils. These are located near the bottom of the unit. Make sure they are clean. Also, make sure that the ends are free from debris. If you see any dirt, then you should use a vacuum cleaner to get rid of them. If you want to learn more about it, then  read more

Next, you should inspect the evaporator fan motor. This is usually found under the evaporator coil. Check its blades. If you notice any damage, then replace it immediately. If you cannot locate the evaporator fan motor, then you should call an expert technician for help.

Next, you should check the blower wheel. This is usually located on top of the unit. Look at the bearings. If you see any signs of wear and tear, then you should replace them.

After that, you should check the filters. There are two types of filters: one is the indoor filter and another is the outdoor filter. Both of them should be cleaned regularly.

Finally, you should check the drain pan. This is where the water drains after being cooled down. If you see any leaks, then you should clean it up immediately.

Once you have checked all of these parts, then you can start reassembling the unit. First, reconnect the wires to their respective terminals. Then, put the back panel back into place. Screw the screws back into place.

Finally, test the unit again. If everything works fine, then you can leave it alone. However, if you still experience issues, then you should call a professional technician to help you fix your ac.