The function of the positioning component is to make the blank or process part have the correct position on the mold relative to the convex and concave molds. There are many structural forms of positioning parts. The positioning parts used to position the strip include stopper pins, guide pins, guide plates, side pressure devices, guide pins, side blades, etc., for the purpose of pricing process parts. Positioning components combined with positioning pins, positioning plates, etc.

Pricing components are basically standardized, and corresponding standard clothing can be selected according to the shape, size, and small yield requirements of bad materials or pre-order parts.

The scope of application of the overall positioning block is generally suitable for large and medium-sized molds, deep cavity molds, and molds with large lateral forces. Please note that wear-resistant plates are generally required on the inclined surface, and oil storage tanks are designed on the working surface. The wear plates of export molds and medium and large molds are required to be fixed by sinking grooves.

The depth of the sink is 6mm, and both ends of the sink are open, reducing the workload of finishing with a small knife.

The scope of application of the slope positioning block is generally suitable for small and medium molds, shallow cavity molds, and molds with small lateral force.

The zero-degree positioning block is divided into two forms. The scope of application of the overall form is generally used on small molds. The scope of application of the split structure method is that when there is a friction surface less than 10 degrees in the mold parting surface, use a zero-degree positioning block to protect the parting surface from friction.

TAIZHOU HUANGYAN JINHONG MOULD PARTS CO., LTD. is an injection mold maker from China Ejector sleeve, its own plastic mold factory specializes in the production of plastic compression springs, positioning components, and other products.