1. When the fsb fsb-l fluoroplastic pump is installed, the weight of the pipeline should not be added to the pump, and there should be their own supports to avoid deformation affecting the running performance and life.

2. It is an integral structure with the motor, and there is no need to align it during installation, so it is very convenient to install.

3. When installing the fsb fsb-l fluoroplastic pump, the anchor bolts must be tightened to avoid the impact of vibration on the pump performance during startup.

4. Before installing the pump, carefully check whether there are any hard substances (such as stones, iron particles, etc.) in the pump flow channel that affect the operation of the pump, so as to avoid damage to the impeller and pump body when the pump is running.

5. For the convenience of maintenance and safe use of fsb fsb-l fluoroplastic pump, a regulating valve is installed on each of the inlet and outlet pipelines of the pump and a pressure gauge is installed near the pump outlet to ensure operation within the rated head and flow range. Ensure the normal operation of the pump and increase the service life of the pump.

6. When fsb fsb-l fluoroplastic pump is used for suction, it should be equipped with a bottom valve, and the inlet pipeline should not have too many bends, and there should be no water leakage or air leakage.

7. The discharge pipeline such as the check valve should be installed outside the gate valve.

8. After installation, turn the pump shaft, the impeller should have friction noise or stuck phenomenon, otherwise the pump should be disassembled to check the cause.

9. The installation method of fsb fsb-l fluoroplastic pump is divided into rigid connection and flexible connection installation.

fsb fsb-l fluoroplastic pump https://www.luolintec.com/Corrosion-resistant-pump